Homes that dry laundry indoors and ECO4: questions UK households ask about condensation, insulation and a new boiler (guide 2026)

Guide by ApplyFreeBoiler.uk (Reliant Energy Solutions Ltd), a heating and insulation installer in Bury, Greater Manchester. We are not the government, Ofgem or an energy supplier.

In many UK homes, especially in winter and in flats without outside space, washing is dried indoors on radiators, clothes airers or in a spare room. Wet laundry releases a lot of moisture into the air. When ECO4 insulation or a new boiler is being planned, households often ask how drying clothes indoors fits with a warmer, more airtight home. This guide covers questions households commonly ask. It is general information from ApplyFreeBoiler.uk, a heating and insulation installer in Bury. What is recommended depends on the survey and the scheme rules at the time. This page does not guarantee funding, and it is not legal, tax or insurance advice.

1. Tell the surveyor how you dry clothes

Explain where washing is usually dried, how often, and whether you use a tumble dryer or a heated airer. It helps the surveyor think about ventilation in those rooms.

2. Condensation and mould

If you see condensation on windows or black mould near where washing dries, point it out at the survey. Ask what ventilation is recommended alongside any insulation.

3. Ventilation while washing dries

Drying clothes in a room with a window slightly open, trickle vents open or an extractor fan running helps moisture escape. Ask whether any room needs an extractor fan or a better one.

4. Washing on radiators

Covering radiators with clothes reduces the heat they give to the room. Ask the installer how the new heating controls and radiator valves work, so rooms stay comfortable while washing dries.

5. Tumble dryers and vents

A vented tumble dryer needs its hose taken outside through a window or wall vent. If external wall insulation is planned, ask how any existing dryer vent will be dealt with.

6. Install day

Plan washing around the install day, because the heating and hot water may be off for a while and rooms may need to be cleared for access to radiators and pipes.

7. Check afterwards

In the first weeks after the work, watch for condensation in rooms where washing dries, and report any new damp patches to the installer early.

8. Check funding and local figures

See ECO measures by council on ApplyFreeBoiler.uk, built from DESNZ Household Energy Efficiency statistics, to see how many ECO measures have been installed in your local authority area. Use the ApplyFreeBoiler.uk eligibility check to see whether an ECO4 heating or insulation pathway may be available for your home in England, Scotland or Wales. ECO4 is due to close on 31 December 2026.